CDK Neolith on SUMNER Tile System - Bookmark this Page !
NZBC compliant cladding system for large format CDK Porcelain Tiles. eg 3000x1500x6mm.
SUMNER® pre-cladding is fitted by a Licensed Building Practicioner (LBP). Tiles are adhered over SUMNER Board using SUMNER adhesive by approved applicatiors. Typical installations may include chimneys, feature walls, fireplaces, columns etc. Usually for large private homes, shopping centers, appartment buildings or commercial developments.
It is mandetory to submit the CODEMARK certificate (c0.0.1) when applying for building consent. Otherwise the council office does not know you are using this compliant system.
Kindly contact our office if your answers are not on this page.
- Building Consent application documents
- Technical and Installation Manual
- Architectural Details
- SUMNER Board Installation
- SUMNER Checklists - required for CCC
- SUMNER Material Saftey Datasheets (MSDS)
- Terms and Conditions
CODEMARK's 'front end' certification is simple for council offices to approve but only if they know you are using a CODEMARKED system. Submit documents S 0.0.1 and S 0.0.2 when applying for building consent.
c 0.0.1 CODEMARK Certificate of Conformity.
c 0.0.2 CODEMARK Compliance Form to identify scope - architect to complete
Repository of branded product and company specific architectural details available for ease of specification.
Full Drawing Sets
Over Timber or Steel Frame Construction
c 2.1.0 Vertical XSection For Timber Foundation
c 3.0.0 Slab edge - standard
c 3.0.1 Slab edge - rebated
c 3.1.0 Window detail plan - basic
c 3.1.1 Window detail elevation - basic
c 3.1.2 Window detail plan - Deep reveal
c 3.1.3 Window detail elevation - Deep reveal
c 3.2.0 Door detail plan
c 3.2.1 Door detail elevation
c 3.3.2 Abutment horizontal to weatherboard - elevation
c 3.3.3 Abutment - internal corner (negative detail for weatherboard)
c 3.3.4 Abutment vertical junction - plan
c 3.3.5 Abutment internal corner (Not weatherboard)
c 3.4.1 Roof detail - back sloping barge
c 3.4.2 Roof detail - apron flashing
c 3.4.3 Soffit termination / roof verge
c 3.4.4 Soffit - Tiled
c 3.5.3 Meter Box detail
c 3.5.5 Pipe Penetration Detail
c 3.5.6 Vertical movement control joint.pdf
c 3.5.7 Horizontal inter-Storey control joint.pdf
c 4.0.0 Corner detail - internal mitred corner
c 4.0.1 Corner detail - internal butt to corner
c 4.1.0 Corner detail - external mitred corner
c 4.1.1 Corner detail - external butt to corner
c 9.0 Parapet Detail - mitred
c 9.0 Parapet Detail - butt to
Over Masonry Construction
These two forms need to be completed by the appropriate trades people and emailed to firstname.lastname@example.org. For more information about this process please refer our CCC webpage.